Shure A15TG User Manual
©2009 Shure Incorporated
27C8430 (Rev. 7)
27C8430 (Rev. 7)
Model
A15TG
User Guide
Printed in U.S.A.
MODEL A15TG MICROPHONE LEVEL TONE GENERATOR
The Shure A15TG Tone Generator is a battery-powered 700 Hz signal
source that can be used to troubleshoot low-impedance, balanced-line
microphone inputs.
The A15TG includes a recessed On-Off switch and a three-pin XLR au-
dio connector. A removable end cap allows easy battery installation and
removal. The A15TG can also tolerate the presence of phantom power,
or a short circuit in the line it is driving. Built-in short circuit protection al-
lows normal operation to resume after a short is removed.
source that can be used to troubleshoot low-impedance, balanced-line
microphone inputs.
The A15TG includes a recessed On-Off switch and a three-pin XLR au-
dio connector. A removable end cap allows easy battery installation and
removal. The A15TG can also tolerate the presence of phantom power,
or a short circuit in the line it is driving. Built-in short circuit protection al-
lows normal operation to resume after a short is removed.
BATTERY LIFE
The A15TG can operate continuously for approximately 1000 hours on
one 1.5V alkaline battery. To conserve battery power, make sure the
On-Off switch is in the Off position when the A15TG is not in use.
one 1.5V alkaline battery. To conserve battery power, make sure the
On-Off switch is in the Off position when the A15TG is not in use.
BATTERY INSTALLATION
1. Unscrew the end cap.
2. Insert the battery with the “+” terminal facing the “+” mark inside the
2. Insert the battery with the “+” terminal facing the “+” mark inside the
end cap.
3. Reinstall the end cap.