NEC 0799-20 User Manual

1.  Hold power tools by insulated grip-

ping surfaces when performing an 
operation where the cutting tool may 
contact hidden wiring or its own cord. 
Contact with a “live” wire will make ex-
posed metal parts of the tool “live” and 
shock the operator.

2. 

Maintain labels and nameplates. These 
carry important information. If unread-
able or missing, contact a MILWAUKEE 
service facility for a free replacement.

3.  WARNING! Some dust created by power 

sanding, sawing, grinding, drilling, and 
other construction activities contains 
chemicals known to cause cancer, birth 
defects or other reproductive harm. Some 
examples of these chemicals are:

• 

lead from lead-based paint

• 

crystalline silica from bricks and cement 
and other masonry products, and

• 

arsenic and chromium from chemically-
treated lumber.

 

Your risk from these exposures varies, 
depending on how often you do this 
type of work. To reduce your exposure 
to these chemicals: work in a well ven-
tilated area, and work with approved 
safety equipment, such as those dust 
masks that are specially designed to 
fi lter out microscopic particles.

1.  Keep work area clean and well lit. 

Cluttered or dark areas invite acci-
dents.

2.  Do not operate power tools in ex-

plosive atmospheres, such as in the 
presence of fl ammable liquids, gases 
or dust. Power tools create sparks which 
may ignite the dust or fumes.

3.  Keep children and bystanders away 

while operating a power tool. Distrac-
tions can cause you to lose control.

4.  Power tool plugs must match the 

outlet. Never modify the plug in any 
way. Do not use any adapter plugs 
with earthed (grounded) power tools. 
Unmodifi ed plugs and matching outlets 
will reduce risk of electric shock.

5.  Avoid body contact with earthed or 

grounded surfaces such as pipes, 
radiators, ranges and refrigerators. 
There is an increased risk of electric shock 
if your body is earthed or grounded.

6.  Do not expose power tools to rain or 

wet conditions. Water entering a power 
tool will increase the risk of electric 
shock.

7. 

Do not abuse the cord. Never use the 
cord for carrying, pulling or unplug-
ging the power tool. Keep cord away 
from heat, oil, sharp edges or moving 
parts.  Damaged or entangled cords 
increase the risk of electric shock.

8.  When operating a power tool out-

doors, use an extension cord suitable 
for outdoor use. Use of a cord suitable 
for outdoor use reduces the risk of elec-
tric shock.

9.  Stay alert, watch what you are do-

ing and use common sense when 
operating a power tool. Do not use 
a power tool while you are tired or 
under the infl uence of drugs, alcohol 
or medication. A moment of inattention 
while operating power tools may result 
in serious personal injury.

10.  Use safety equipment. Always wear 

eye protection. Safety equipment such 
as dust mask, non-skid safety shoes, 
hard hat, or hearing protection used 
for appropriate conditions will reduce 
personal injuries.

11.  Avoid accidental starting. Ensure the 

switch is in the off-position before 
plugging in. Carrying power tools with 
your  fi nger on the switch or plugging in 
power tools that have the switch on invites 
accidents.

12.  Remove any adjusting key or wrench 

before turning the power tool on. A 
wrench or a key left attached to a rotat-
ing part of the power tool may result in 
personal injury. 

13.  Do not overreach. Keep proper foot-

ing and balance at all times. This 
enables better control of the power tool 
in unexpected situations.

14.  Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair, 
clothing and gloves away from moving 
parts. Loose clothes, jewellery or long hair 
can be caught in moving parts. 

15.  If devices are provided for the connec-

tion of dust extraction and collection 
facilities, ensure these are connected 
and properly used. Use of these de-
vices can reduce dust-related hazards.

16.  Do not force the power tool. Use the 

correct power tool for your applica-
tion. The correct power tool will do the 
job better and safer at the rate for which 
it was designed.

17.  Do not use the power tool if the switch 

does not turn it on and off. Any power tool 
that cannot be controlled with the switch is 
dangerous and must be repaired.

18.  Disconnect the plug from the power 

source and/or the battery pack from 
the power tool before making any 
adjustments, changing accessories, 
or storing power tools. Such preven-
tive safety measures reduce the risk of 
starting the power tool accidentally.

19.  Store idle power tools out of the 

reach of children and do not allow 
persons unfamiliar with the power 
tool or these instructions to operate 
the power tool. Power tools are danger-
ous in the hands of untrained users.

20.  Maintain power tools. Check for 

misalignment or binding of moving 
parts, breakage of parts and any 
other condition that may affect the 
power tool's operation. If damaged, 
have the power tool repaired before 
use.  Many accidents are caused by 
poorly maintained power tools.

21.  Keep cutting tools sharp and clean. 

Properly maintained cutting tools with 
sharp cutting edges are less likely to 
bind and are easier to control.

22.  Use the power tool, accessories and 

tool bits etc., in accordance with 
these instructions and in the manner 
intended for the particular type of 
power tool, taking into account the 
working conditions and the work to 
be performed. Use of the power tool for 
operations different from those intended 
could result in a hazardous situation.

28.  Have your power tool serviced by a 

qualifi ed repair person using only 
identical replacement parts. This will 
ensure that the safety of the power tool 
is maintained.

23.  Ensure the switch is in the off posi-

tion before inserting battery pack. 
Inserting the battery pack into power 
tools that have the switch on invites 
accidents.

24.  Recharge only with the charger speci-

fi ed by the manufacturer. A charger 
that is suitable for one type of battery 
pack may create a risk of fi re when used 
with another battery pack.

25.  Use power tools only with specifi cally 

designated battery packs. Use of any 
other battery packs may create a risk of 
injury and fi re.

26.  When battery pack is not in use, keep 

it away from other metal objects like 
paper clips, coins, keys, nails, screws, 
or other small metal objects that can 
make a connection from one terminal 
to another. Shorting the battery terminals 
together may cause burns or a fi re.

27.  Under abusive conditions, liquid may 

be ejected from the battery, avoid 
contact. If contact accidentally oc-
curs, fl ush with water. If liquid con-
tacts eyes, additionally seek medical 
help.  Liquid ejected from the battery 
may cause irritation or burns.