Wagner SprayTech 9140S User Manual

Page of 20
English
Printed in the U. S. A.
M
ODELS
9140, 9140S, 9150, 9170, 9190 
AND
9210
H
IGH
P
ERFORMANCE
A
IRLESS
S
PRAYER
T
ABLE OF
 C
ONTENTS
:
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
COMPONENTS AND DESCRIPTION . . . . . . . . . . . . . . . . . . 4
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PLUGGING IN THE SPRAYER . . . . . . . . . . . . . . . . . . . . . . . 6
PRESSURE RELIEF PROCEDURE . . . . . . . . . . . . . . . . . . . 6
PURGING AND PRIMING. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SPRAYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SPRAYING TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . 9
CLEANUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
FLUID SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-51
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
O
WNER
S MANUAL
• 
R
EAD THIS MANUAL FOR COMPLETE INSTRUCTIONS
0803
• Form No. 0512731G
S
PECIFICATIONS
:
Weight .............................. 25 lbs (9140S)
31 lbs (9140, 9150)
36 lbs (9170, 9190)
40 lbs (9210)
Capacity ...........................Up to .25 gallon (1 liter) per minute (9140,
9140S, 9150)
Up to .33 gallon (1.25 liter) per minute (9170)
Up to .42 gallon (1.6 liter) per minute (9190)
Up to .45 gallon (1.71 liter) per minute (9210)
Power source ...................1/2 Hp universal motor (9140, 9140S, 9150)
5/8 Hp permanent magnet DC motor (9170)
3/4 Hp permanent magnet DC motor (9190)
7/8 Hp permanent magnet DC motor (9210)
Power requirement ...........15 amp minimum circuit on 115 VAC, 60
Hz current
Generator .........................15 amp A/C
Spraying pressure ............Up to 2800 PSI
Safety features .................Spray gun trigger lock and guard;
built-in tip safety guard; priming
knob for safe pressure release.
Capability..........................Sprays a variety of paints, oil
base, latex, primers, stains,
preservatives and other
nonabrasive materials.
Do not use materials with flash
points below 70°F (21°C).
1-800-880-0993
Wagner Technical Service
Need help? 
Call us first for answers fast.
Call Wagner Spray Tech toll-free if you have any 
comments or problems with this product.
1770 Fernbrook Lane, Minneapolis, MN  55447
http://www.wagnerspraytech.com
Visit us on the world wide web!
U.S. Patent No. 6,435,846
This pump is available in two models: a
stand model and a cart model.  The cart
model is shown in this manual.  All
information given for the cart model
applies to the stand model except where
indicated.
This pump should not be used with textured materials,
block filler, or asphalt sealer.