Planar PS5580 User Manual

Last (Top) Row

Indisys Management System: Setup and Operation

11

Where the corners meet along the top edge, slip an alignment guide over the 

corner hardware on the back. This guide should protrude. 

Tighten the screws for this guide.

Repeat the steps 

 above until all rows except the top row are mounted.

Do the steps for "Intermediate Rows" above, except the alignment guides along the 
top should not protrude. 

To remove a panel, all panels above and to the right of the panel you need 

must be removed, starting with the panel in the upper right corner of the 
wall. 

For each panel that you remove:

Slightly loosen all the corner screws that are accessible.

Remove any alignment guides that are only connected to one other panel.

Lift the panel to disengage it from the alignment brackets below and 
remove it from the wall. 

To rebuild the wall, reverse the steps taken for each panel, backtracking until 

the panel in the upper right corner is in place.