Planar PS5580 User Manual

Environmental Conditions for Installation

PS5580 Installation Guide

4

• Since the PS5580 panel is very sensitive to physical impact, installation requires 

considerable caution

• Minimum clearance (20 mm) must be observed—top, bottom, and both 

sides—for proper ventilation. Installation must avoid air-tight or nearly air-tight 
places. Improper ventilation causes malfunction and shortens product life by a 
rapid internal temperature rise. If the PS5580 must be installed with improper 
ventilation, additional ventilation openings or fans must be provided to keep 
the internal temperature between 0°-35°C (32°-95°F).

• For grounding the PS5580 and attached devices, it should be connected as a 

frame ground.

• Considering the PS5580 max power consumption, check the main electrical 

specification.

• Regularly clean the vent holes in the back of the PS5580 to prevent 

overheating. 

• Temperature: 5-35°C (41-95°F)
• Humidity 35-75%
• Do not install the set it an air-tight condition; provide adequate ventilation.
• Do not install the set in a place of direct sunlight or excessive exposure to lights.

Blackening, stains or burning effect on the screen may occur through 

improper installation or use outside these recommended conditions.