Wilton 3400 User Manual
4
Cutting capacity
Blade speeds
Blade drive
Blade drive
Motor
Blade guides
Blade guides
Blade size
Blade wheels
Dimensions (LWH)
Weight
Wet cutting package
Blade wheels
Dimensions (LWH)
Weight
Wet cutting package
General
Specifications
Specifications
The Wilton Models 3400 and 3410 cut-off band saws
are designed for high production cut-off work. Four cutting
speeds and a hydraulic feed control allows the efficient cut-
ting of virtually any material.
speeds and a hydraulic feed control allows the efficient cut-
ting of virtually any material.
A removable table also allows the saw to function as a
vertical band saw.
7 in. (178mm) round bar stock or tubing
9 1/2 in. wide x 7 in. high (240 x 178mm) rectangular stock
12 in. wide x 1 in. high (305 x 25.4mm) flat stock
3 3/4 in. wide x 6 in. high (95.3 x 150mm) at 45 degree angle
9 1/2 in. wide x 7 in. high (240 x 178mm) rectangular stock
12 in. wide x 1 in. high (305 x 25.4mm) flat stock
3 3/4 in. wide x 6 in. high (95.3 x 150mm) at 45 degree angle
The Model 3410 is equipped with an optional coolant
system which can greatly extend blade life and speed the cut-
ting of a variety of materials which are best cut with cutting
fluids and coolants.
ting of a variety of materials which are best cut with cutting
fluids and coolants.
The Model 3400 is not equipped with a coolant system.
However, the coolant system is available as an add-on kit for
customer installation.
customer installation.
1 gallon (4.4L) capacity tank with 3GPM (13L/M) pump -- Optional wet kit
Part No. 5635500 includes tank with baffle, pump 120V/240V, hoses,
flexible nozzle, shut-off valve and required electrics. This kit is delivered
installed on Model 3410 saws.
Part No. 5635500 includes tank with baffle, pump 120V/240V, hoses,
flexible nozzle, shut-off valve and required electrics. This kit is delivered
installed on Model 3410 saws.
80, 130, 180 and 265 SFM -- belt selectable
Heat treated steel worm pinion driving a bronze
worm ring gear in an oil bath
worm ring gear in an oil bath
3/4 HP, 1725 RPM, 115/230V, single phase, capacitor start
Side: Eccentric shaft with sealed ball bearings
Rear: Sealed ball bearing
3/4 x .032 x 93 in.
11 7/16 in. (280.56mm) diameter flanged cast iron
50 x 18 x 41 in. (1270 x 457 x 1041mm) in lowered position
275 lbs. (125kg)
Side: Eccentric shaft with sealed ball bearings
Rear: Sealed ball bearing
3/4 x .032 x 93 in.
11 7/16 in. (280.56mm) diameter flanged cast iron
50 x 18 x 41 in. (1270 x 457 x 1041mm) in lowered position
275 lbs. (125kg)
Specifications:
9 1/2 x 10 in. (241 x 254mm)
Vertical saw operation
Table size (LW)
Table size (LW)