Grizzly G0475 User Manual

G0474/G0475 Sandblasters

-7-

The Model

G0474/G0475

was carefully packed

when  it  left  our  warehouse.  If  you  discover  the
equipment  is  damaged  after  you  have  signed
for  delivery,  please  immediately  call  Customer
Service at (570) 546-9663 for advice.

Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.

This equipment pres-

ents serious injury haz-

ards to untrained users.

Read through this entire

manual to become famil-

iar with the controls and

operations before start-

ing the equipment!

Unpacking

Set Up Safety

SECTION 2: SET UP

The following items are needed to complete the
set up process, but are not included with your
equipment:

Description

Qty

•

Phillips Screwdriver #2 ............................... 1

•

Standard Screwdriver #2 ............................ 1

•

Teflon Tape ................................................ 1

•

Wrench 10mm ............................................ 1

•

Wrench 17mm ............................................ 1

•

Wrench 22mm ............................................ 1

Items Needed for

Set Up

Sandblasting operations are extremely demand-

ing on some compressors and can cause a com-

pressor overload or overheated condition. Refer

to your compressor Owner's Manual and make

sure that it can handle the load of sandblasting. If

it can, you must follow these setup recommenda-

tions:

We recommend using a compressor that is 5 HP
and above with a minimum of a 12 CFM rating.

Keep  your  compressor  completely  isolated  from
your sandblasting environment, or keep the work
area  downwind  from  the  compressor.  Airborne
abrasive  dust  will  destroy  rings,  pistons,  valves,
and bearings.

Make sure to increase the maintenance interval of
your compressor if using it in sandblasting opera-
tions.

Compressor