3M 3125 User Manual
3
Nib Removal Sander 3125
Owner’s manual
Owner’s manual
A table of contents:
a.
SAFETY
INFORMATION
1
b.
OPERATING
INSTRUCTION
3
c. SPARE PARTS INFORMATION (exploded view)
4
d.
DISASSEMBLY
METHOD
6
e. GUIDELINE FOR PARTS EXCHANGE
10
f.
ASSEMBLY
METHOD
11
Appendix. - TROUBLESHOOTING SPIDER CHART
a. SAFETY INFORMATION
Please read, understand, and follow all safety information contained in these instructions prior to the use of this tool.
Retain these instructions for future reference.
Intended Use:
This tool is designed for repairing painted automobile bodies and parts as well as FRP (Fiber Reinforced Plastic) and wood. It
should not be operated in water or in an excessive wet application. All users should review this document and be trained in the
safe use of this tool.
Improper use can cause this tool to break apart and may cause injury to operators and bystanders. **
* For eye and face protection, see ANSI standard Z87.1
** For further information on coated abrasive products, consult ANSI standard B7.7, “Safety Requirement for Abrading
Material with Coated Abrasive Systems” Both are available from American Standard Institute, Inc., (212)642-4900
** For further information on coated abrasive products, consult ANSI standard B7.7, “Safety Requirement for Abrading
Material with Coated Abrasive Systems” Both are available from American Standard Institute, Inc., (212)642-4900
SPECIFICATION
Motor RPM
Orbit Dia.
Air flow
Air Pressure
Weight
Pad Size
7,500
0.118 inch
5.3 SFM
58. 5 - 95.0 PSI
1.06 pounds
1.18 inch
(3 mm)
(150 LPM)
(0.40 - 0.65 Mpa)
(0.48 kg)
(30 mm)
1