Planar LA1910RTC User Manual

Touch Screen Driver Installation

Touch driver information is located on the enclosed CD-ROM for the following
operating systems: Windows Me/2000/98/XP series.

Driver Installation Process:

1. Before installing the touch driver be sure that the USB cable is dis-
connected from the LCD.

Please read "Readme.txt" before you start the installation

Please note: Once the CD-Rom is loaded into the PC, it should automatically
load the installation software. If not, follow steps 2-5 below.

2. Open the CD-Rom

3. Open the Touchware folder

4. Open the Disk 1 folder

5. Double click the "setup.exe" file

6. Follow the installation instructions

7. Connect the USB cable to the LCD.

8. If the touch screen driver does not automatically load, restart the

system.

Touch Panel Setting and Calibration:

1. Open the “Control Panel” of the system.

2. Double click the “Touch Panel” icon.

3. Select the item you want to set up and change the setting values.

Some setting changes are effective only when the system is rebooted.