Panasonic HX-A100 User Manual

Page of 65
- 11 -
Charging the battery
≥ This unit has a built-in rechargeable lithium-ion battery. Do not remove except when 
disposing of this unit. (
)
≥ The battery will not be charged if this unit is turned on. Connect it with the PC to charge 
the battery after turning it off.
≥ It is recommended to charge the battery in a temperature between 10 oC and 30 oC.
A: LOCK switch
B: USB cable (supplied)
C: Unlocked when the red indicator is visible
1
Slide A to the left to unlock the side cover and slide the side cover 
downward to open it.
2
Connect the USB terminal of this unit to a PC with the USB cable 
(supplied).
≥ Insert the USB cable securely all the way.
≥ The Power lamp will flash red at an interval of 2 seconds (approximately 1 second on, 1 second 
off), indicating that charging has begun.
It will turn off when the charging is completed.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any 
other USB cables.)
≥ Do not heat or expose to flame.
≥ Do not leave the unit (including built-in battery) in a car exposed to direct sunlight for a long 
period of time with doors and windows closed.
≥ If operating time is short even after fully charging the battery, the battery is worn out and needs to 
be replaced. Please contact your dealer.
≥ When the PC is in a power saving mode such as a standby state, the battery may not be charged. 
Cancel the power saving mode, and connect this unit again.
≥ Operation is not guaranteed when devices are connected through USB hubs or by using 
extension cables.
≥ Operation cannot be guaranteed on all devices having a USB terminal.
Power supply
When this unit is purchased, the battery is not charged. Charge the battery fully before 
using this unit for the first time.
B
A
C
HX-A100_VQT4X97.book  11 ページ  2013年2月14日 木曜日 午後2時16分