Panasonic HX-A100 User Manual
- 53 -
Others
Initialising the network settings
This returns the following network-related settings to the default states.
≥ An SSID/password for this unit set after the purchase
≥ An SSID/password for this unit set after the purchase
([Camera Wi-Fi settings]
# [Camera SSID settings] in the Image App)
≥ An SSID/password for the access point you use in Live broadcast mode
([Camera Wi-Fi settings]
# [Live mode settings] # [Set connect. dest.] in the Image App)
≥ An SSID/password for the access point you use in Access Point mode
([Camera Wi-Fi settings]
# [AP mode setup] # [Set connect. dest.] in the Image App)
≥ A login ID and password for the “LUMIX CLUB”
([Playback settings]
# [LUMIX CLUB settings] # [Manage login ID] in the Image App)
Turn on this unit while pressing and holding
the Wi-Fi/WPS button, and press and hold the
Wi-Fi/WPS button A and the power button B
for approximately 5 seconds
the Wi-Fi/WPS button, and press and hold the
Wi-Fi/WPS button A and the power button B
for approximately 5 seconds
.
≥ When the Wi-Fi mode lamps [ ] [
] [
] light up for
approximately 1 second and turn off, the initialisation of
the network settings is complete.
the network settings is complete.
≥ When the operation buttons are locked (
), the network settings cannot be initialised.
≥ Initialising a login ID and password for the “LUMIX CLUB” will only delete them from this unit, and
will not cancel the membership. The site remains available.
Initialising this unit
B
A
HX-A100_VQT4X97.book 53 ページ ２０１３年２月１４日 木曜日 午後２時１６分