Toshiba A30 User Manual

 

Operating Basics 

 Version   

1

   Last Saved on 12/08/2003 14:15 

ENGLISH using  Euro_M.dot –– Printed on 12/08/2003 as IM_A30EN 

To disconnect the LAN cable, follow the steps below. 
1. 

Pinch the lever on the connector in the computer’s LAN jack and pull 
out the connector. 

Disconnect the cable from the LAN hub in the same manner. Check 
with your LAN administrator before disconnecting from the hub. 

The computer’s wireless communication function supports both wireless 
LAN devices. 

The wireless LAN is compatible with other LAN systems based on Direct 
Sequence Spread Spectrum radio technology that complies with IEEE 
802.11 wireless LAN standard (802.11a, 802.11b, 802.11a+b, 802.11g, 
802.11a+g). It supports the following features: 
This is a Certification Mark of the Wireless Ethernet Compatibility Alliance, 
Inc. 

■ 

Automatic Transmit Rate Select mechanism in the transmit range of 
54, 11, 5.5, 2 and 1 Mbit/s. (54Mbit/s is available only on 802.11a or 
802.11g)  

■ 

Frequency Channel Selection (2.4 GHz)  

■ 

Roaming over multiple channels 

■ 

Card Power Management 

■ 

Wired Equivalent Privacy (WEP) data encryption. Wake-up on LAN 
does not function on a wireless LAN. 

You can enable or disable wireless LAN function, with the on/off switch. 
No transmissions are sent or received when the switch is off. Slide the 
switch toward the left to turn it on and toward the right to turn it off.