PSC 8100 User Manual

Your 8200 scanner may be equipped with the 

optional Productivity Index Reporting™ feature. This feature allows for data 
collection on the readability index of bar codes scanned by the scanner. This 
data may be transmitted to the POS Terminal where it may be easily sorted for 
action by the MIS department to improve bar code quality at the front end.

For additional information on how to enable Productivity Index Reporting in 
your scanner, please refer to the Product Reference Guide (PRG).

Hold, then 
release when the 
beeper sounds

Increments tone

Press the push button for approximately 2 sec-
onds, then release. Each time this is done, the 
beeper will sound at one of three tones. Stop 
when the desired tone (high, medium or low) 
is sounded.

4 Seconds

Scanner Diagnostics 

Mode

a

This mode allows system support personnel to 
troubleshoot problems with the scanner. Press 
the button for eight seconds or cycle power to 
exit Scanner Diagnostics Mode and reset the 
scanner.

8 Seconds

Resets Scanner

b

Only system support personnel should per-
form a reset.

a. By standard default, this function is normally disabled to prevent accidental activation 

by users.

b. Users should not perform scanner resets except under the direction of trained sys-

tems support personnel.