Nikon 9000ED User Manual

2 

Place fi lm in the holder

FH-835S Holder for 35-mm Film
The FH-835S can be used with one or two strips of 35-mm fi lm.  Each strip can be up to 
six frames long.

 Open the holder

Insert your fi ngers through the holes 
in the bottom half of the holder and 
undo the latches, then open the 
holder.

Latches

 Insert fi lm

Place fi lm in the holder with the refl ec-
tive fi lm base up and the matte emulsion 
surface down.

Align the fi rst frame in each strip with 
an aperture at the left end of the hold-
er.  Leaving the apertures at the left 
end of the holder uncovered or cover-
ing them with a masking sheet could 
cause scanning errors or interfere with 
accurate color reproduction.

Use only one type of fi lm; do not mix 
negatives with positive fi lm.

Do not place fi lm or masking sheets so that they protrude from the holder or overlap the fi lm guides.  
Failure to observe this precaution could cause the holder to jam in the scanner.

When fi lm is examined under bright light, the image on the emulsion surface will be in slight relief, with 
bumps and hollows where the image has been developed.  The opposite surface (the fi lm base) will be 
refl ective and smooth.  Insert fi lm with the base up.

Direction of 

insertion 

Thumbnails 

displayed in 

order shown

Arrow