Raritan Computer DKX2-0E-E User Manual

 

Chapter 9: Device Management 

 

 

131

 

2.  Check the Enable SNMP Logging option; this enables the remaining 

SNMP fields. 

3.  In the Name, Contact, and Location fields, type the SNMP Agent's 

(this Dominion unit's) name as it appears in the Dominion KX II 
Console interface, a contact name related to this unit, and where the 
Dominion unit is physically located, respectively. 

4.  Type the Agent Community String (the Dominion unit's string). An 

SNMP community is the group that devices and management 
stations running SNMP belong to; it helps define where information 
is sent. The community name is used to identify the group; an SNMP 
device or agent may belong to more than one SNMP community. 

5.  Specify whether the community is Read-Only or Read-Write using 

the Type drop-down list. 

6.  Configure up to five SNMP managers by specifying their Destination 

IP, Port #, and Community. 

7.  Click on the Click here to view the Dominion-KX2 SNMP MIB link to 

access the SNMP Management Information Base. 

8.  Click OK. 

 

Syslog Configuration 

 

¾ 

To configure the Syslog (enable Syslog forwarding): 

1.  Check the Enable Syslog Forwarding option to log the device's 

messages to a remote Syslog server. 

2.  Type the IP Address of your Syslog server in the IP Address field. 

3.  Click OK. 

¾ 

To cancel without saving changes: 

Click Cancel. 

¾ 

To reset to factory defaults: 

Click the Reset To Defaults button.