Brother Multi-Protocol On-board Ethernet Print Server and Wireless Ethernet User Manual
33
Configuring your machine for a wireless network (For HL-5470DW(T) and HL-6180DW(T))
3
f
The machine will search for your network and display a list of available SSIDs.
If a list of SSIDs is displayed, press a or b to choose the SSID you wrote down in step a. Select the
SSID you want to connect with.
Press OK.
Do one of the following:
If you chose None, go to step i.
If you chose WEP, go to step g.
If a list of SSIDs is displayed, press a or b to choose the SSID you wrote down in step a. Select the
SSID you want to connect with.
Press OK.
Do one of the following:
If you chose None, go to step i.
If you chose WEP, go to step g.
g
Enter the WEP key you wrote down in step a. Press OK. Go to step h. (For information on how to enter
text: uu Quick Setup Guide.)
text: uu Quick Setup Guide.)
h
To apply the settings, choose Yes. To cancel, choose No.
Do one of the following:
If you chose Yes, go to step i.
If you chose No, go back to step f.
Do one of the following:
If you chose Yes, go to step i.
If you chose No, go back to step f.
i
The machine will attempt to connect to the wireless device you have chosen.
j
If your wireless device is connected successfully, the display shows Connected.
The machine will print your machine's wireless status report. If the connection failed, check the error
code on the printed report and refer to uu Quick Setup Guide: Troubleshooting.
The machine will print your machine's wireless status report. If the connection failed, check the error
code on the printed report and refer to uu Quick Setup Guide: Troubleshooting.
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing the
printer driver, please choose Install Printer Driver from the CD-ROM menu.
printer driver, please choose Install Printer Driver from the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing the
printer driver, please choose Start Here OSX from the CD-ROM menu.
You have completed the wireless network setup. If you would like to continue installing the
printer driver, please choose Start Here OSX from the CD-ROM menu.
Using a New SSID
3
If you are using a new SSID then all other devices will connect using the SSID that you assign to the machine
in the following steps. You will need to connect to this SSID from your computer when it is placed in Ad-hoc
mode.
in the following steps. You will need to connect to this SSID from your computer when it is placed in Ad-hoc
mode.
a
Press a or b to choose Network.
Press OK.
Press OK.
b
Press a or b to choose WLAN.
Press OK.
Press OK.
c
Press a or b to choose Setup Wizard.
Press OK.
Press OK.
d
When WLAN Enable? is displayed, press a to accept.
This will start the wireless setup wizard.
To cancel, press Cancel.
This will start the wireless setup wizard.
To cancel, press Cancel.