Lenovo 6522 User Manual
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
is solved.
v
See the
″Parts Listing″ section in the Hardware Maintenance Manual to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
trained service technician.
Error code
Description
Action
0011002
Microprocessor mismatch
1. Run the Setup utility and view the microprocessor
information to compare the installed
microprocessor specifications.
microprocessor specifications.
2. (Trained service technician only) Remove and
replace one of the microprocessors so that they
both match.
both match.
0011004
Microprocessor failed BIST
1. Update the firmware (see “Updating the firmware”
2. (Trained service technician only) Reseat
microprocessor 2.
3. Replace the following components one at a time,
in the order shown, restarting the server each
time:
time:
a. (Trained service technician only)
Microprocessor
b. (Trained service technician only) System
board
001100A
Microcode update failed
1. Update the server firmware (see “Updating the
2. (Trained service technician only) Replace the
microprocessor.
0050001
DIMM disabled
1. If the server fails the POST memory test, reseat
the DIMMs.
2. Remove and replace any DIMM for which the
associated error LED is lit (see “Removing a
memory module” on page 37 and “Installing a
memory module” on page 38).
memory module” on page 37 and “Installing a
memory module” on page 38).
3. Run the Setup utility to enable all the DIMMs.
4. Run the DSA memory test.
0051003
Uncorrectable DIMM error
1. If the server failed the POST memory test, reseat
the DIMMs.
2. Remove and replace any DIMM for which the
associated error LED is lit (see “Removing a
memory module” on page 37 and “Installing a
memory module” on page 38).
memory module” on page 37 and “Installing a
memory module” on page 38).
3. Run the Setup utility to enable all the DIMMs.
4. Run the DSA memory test.
0051006
DIMM mismatch detected
Make sure that the DIMMs match and are installed in
the correct sequence (see “Installing a memory
module” on page 38).
the correct sequence (see “Installing a memory
module” on page 38).
146
ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Installation and User Guide