Minicom Advanced Systems 5 User Manual
KVM.NET
10
4. Configuring the system components
You must configure the system by inputting details of the:
·
KVM switches connected to IP Access units
·
Target servers connected to the KVM switches / IP Access units
·
IP Access units
As explained in the pre-installation guidelines, Appendix A on page 46 contains a
list of all the details you need to prepare.
list of all the details you need to prepare.
4.1 Defining the KVM switches
You must define all the KVM switch types that are physically connected to the
systems IP Access units.
systems IP Access units.
To define the KVM switch types:
From the menu, expand Settings see Figure 4.
Click here to
expand the Settings
list
expand the Settings
list
Figure 4 Settings
1. Select KVM Switche
s
. A list of KVM switches appears see Figure 5.