3com 3C16700A User Guide
11
Ethernet Hub 4 and 4C—Rear
Power Adapter socket
Only use the power adapter that is supplied with
this OfficeConnect hub. Do not use any other
adapter.
this OfficeConnect hub. Do not use any other
adapter.
10BASE-2 port (Hub 4C only)
Can be used to connect your hub to other OfficeConnect
hubs and equipment with 10BASE-2 cabling.
If used, it is effectively a fifth port. Refer to “Connecting
Hubs Using 10BASE-2” on page 13.
hubs and equipment with 10BASE-2 cabling.
If used, it is effectively a fifth port. Refer to “Connecting
Hubs Using 10BASE-2” on page 13.
AUI port (Hub 4C only)
Allows 10Mbps transceivers of different media types
to be connected to the hub. Connecting a
transceiver automatically disables the 10BASE-2
port.
to be connected to the hub. Connecting a
transceiver automatically disables the 10BASE-2
port.
Uplink/Normal switch
Affects the operation of port 4. For correct usage, refer to
“Connecting Hubs Using 10BASE-T” on page 14.
“Connecting Hubs Using 10BASE-T” on page 14.
Four 10BASE-T RJ-45 ports
Use 10BASE-T cable with RJ-45
connectors. You can connect the
OfficeConnect hub to any workstation
or piece of equipment that has a
10BASE-T port. Refer to “Connecting
Hubs Using 10BASE-T” on page 14.
connectors. You can connect the
OfficeConnect hub to any workstation
or piece of equipment that has a
10BASE-T port. Refer to “Connecting
Hubs Using 10BASE-T” on page 14.
Uplink
Normal
Normal
POWER
COAX
AUI
4
1x
3C16700.book Page 11 Wednesday, July 7, 1999 5:46 PM