Black Box 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU User Manual
724-746-5500 | blackbox.com
Page 19
2.6 ETHERNET MANAGEMENT PORT
The LB510A-R2 offers a 10/100 Ethernet port for configuration and management via
Telnet sessions. Because the Ethernet port is configured as MDI, a crossover Ethernet
cable is required when connecting directly from a local PC or laptop. The Ethernet
interface default IP address is 192.168.200.1.
Telnet sessions. Because the Ethernet port is configured as MDI, a crossover Ethernet
cable is required when connecting directly from a local PC or laptop. The Ethernet
interface default IP address is 192.168.200.1.
Through the Ethernet management port, the following variables can be configured or
monitored:
monitored:
• Password: The password used to login to the console (1-10 characters).
• Circuit ID: The circuit ID communicated to other units via EOC (1-64 charac-
ters). EOC (Embedded Operations Channel) is an out-of-band channel specified
in the G.991.2 standard for SHDSL.
in the G.991.2 standard for SHDSL.
• Data Rate: The DSL data rate is set by specifying the number of 64k timeslots.
• Annex: Either G.991.2 Annex A or Annex B.
The following status information is available through the command line interface:
• Configuration Mode: Whether the LB510A-R2 is configured by DIP switches or
software.
• DSL Link State: In Progress, Success, Deactivated, or Idle.
ON
OFF
OFF
ON
ON
OFF
OFF
4992
ON
OFF
OFF
ON
ON
OFF
ON
5056
ON
OFF
OFF
ON
ON
ON
OFF
5120
ON
OFF
OFF
ON
ON
ON
ON
5184
ON
OFF
ON
OFF
OFF
OFF
OFF
5248
ON
OFF
ON
OFF
OFF
OFF
ON
5312
ON
OFF
ON
OFF
OFF
ON
OFF
5376
ON
OFF
ON
OFF
OFF
ON
ON
5440
ON
OFF
ON
OFF
ON
OFF
OFF
5504
ON
OFF
ON
OFF
ON
OFF
ON
5568
ON
OFF
ON
OFF
ON
ON
OFF
5632
ON
OFF
ON
OFF
ON
ON
ON
5696
S4-2
S4-3
S4-4
S4-5
S4-6
S4-7
S4-8
Data Rate (kbps)