Lindy 25007 Leaflet

 
 
 
 
 
 

 

English  

 

 

 

 

 

LINDY No. 25007 

 
 

 

 
Thank you for purchasing the LINDY 8 Port Gigabit Desktop 
Switch. This high-performance network switch is ideal for use in 
either the home or the office. Its small footprint design means it 
can easily fit on your desktop without taking up too much space.  
 
All of its ports are capable of 10, 100 or 1000Mbps auto-
negotiation, while the 10/100/1000Mbps auto-sensing ability 
provides the easiest, most hassle-free way to migrate from a 
Fast Ethernet to a Gigabit Ethernet network. 
 
This switch delivers a dedicated 10/100/1000Mbps connection to 
every attached client with no bandwidth congestion issues. It 
also supports an auto MDI/MDI-X function - each port can be 
used to connect to another switch or hub without the need for 
crossover cables!  
 
Store-and-forward architecture is used by the switch to filter and 
forward data after each packet is received and examined to be 
free of errors. All of the ports support full and half-duplex 
operation which doubles the network bandwidth and allows the 
simultaneous transmission and reception of frames without 
causing collisions.  
 
The switch provides 9KB Jumbo frame support which can 
improve network performance by allowing more data to be sent 
per transmitted frame.  

 
 
 
 

 

 

For Home and Office Use 
Tested to Comply with FCC Standards 

ƒ 

8 Port Gigabit Desktop Switch  

ƒ 

External Power Supply 

ƒ 

This manual 

 

 

ƒ 

Standards: IEEE 802.3 10Base-T, 802.3u 100Base-TX, 
802.3ab 1000Base-T 

ƒ 

Ports: 8 x RJ-45 10/100/1000Mbps Gigabit Ethernet 

ƒ 

Auto MDI/MDI-X (Auto crossover) 

ƒ 

Network speed: 10/100/1000Mbps & Full/Half-duplex mode 
auto detection (1000Mbps Full duplex only) 

ƒ 

Switching Architecture: Store and Forward 

ƒ 

MAC Address: 8K 

ƒ 

Buffer Memory: 144kB 

ƒ 

Nway Auto-negotiation: All ports 

ƒ 

Dimensions: 146 x 118 x 33mm (WxDxH) 

ƒ 

Weight: 0.5kg  

ƒ 

Power Supply: 12V DC, 1A  

ƒ 

Operating Temperature: 10-45°C 

ƒ 

Operating Humidity: 10-90% (Non-condensing) 

ƒ 

Cable Requirements: Gigabit requires RJ-45 STP/UTP, Cat. 
5e or higher