Sony 8000SF User Manual

237

Multi Program 2

  Chapt

To create video on the M/E or PGM/PST bank assigned to both main and sub 
operations, use the following procedure.

Press the [MAIN] button, turning it on, and turning off the [SUB] button.

With the normal operations, create the main video.

Press the [SUB] button, turning it on, and turning off the [MAIN] button.

Now you can create the sub video.

Create the sub video.

The basic method of operation is the same as for the main video, except 
that the utility 2 bus signal is assigned to background A, and the utility 3 
bus signal is assigned to background B.
For sub, only keys 2 to 4 can be used, and for wipes, standard wipe patterns 
only. There are also other differences in operation from standard mode.

For details, see “Differences Between Multi Program 2 Mode and 
Standard Mode” (page 242) and “Restrictions on Using Multi Program 2 
Mode” (page 243).

Press the [MAIN] and [SUB] buttons simultaneously, turning them on.

If both buttons are lit, the control panel shows the status of main.

Carry out the transition.

Both main and sub video images are switched.

Cross-point assign tables can be set not only for main output but also for sub 
output.
You can set cross-point assign tables for the following banks.

M/E-1 SUB to M/E-3 SUB
P/P SUB

The table actually used is that for which the control panel delegation button is 
lit.