Sony 8000SF User Manual
242
Multi Program 2
Cha
Differences Between Multi Program 2 Mode and
Standard Mode
Standard Mode
The differences from operation in standard mode are as follows.
Item
Main
Sub
Keys
a)
Keys 1 to 4 can be used
Keys 2 to 4 only can be
used
used
Wipes
(background)
(background)
Patterns
Same as standard mode
• Only standard patterns
can be used
• Pattern mix is not
possible
Modifiers
Same as standard mode
• Pairing, modulation,
spring, spiral, and split
cannot be used
cannot be used
• Edge fill mattes are
single-color only
• Replication can be
selected from four
patterns
patterns
Wipes (key)
Same as wipes (background) for sub
DME wipes
Use
Can be used
Cannot be used (Can be
used, with a setting
change)
used, with a setting
change)
Patterns for 1
channel
channel
For a dedicated interface, each of main and sub can be
used.
For the SDI interface, only one of main and sub can be
used.
used.
For the SDI interface, only one of main and sub can be
used.
Patterns for 2
channels
channels
Only one of main and sub can be used
(For each M/E, the number of DMEs that can be used is
the same as in standard mode.)
(For each M/E, the number of DMEs that can be used is
the same as in standard mode.)
Patterns for 3
channels
channels
Backgrounds Wipe edge fill matte
(including color mix and
other settings in the Matte
Adjust menu)
other settings in the Matte
Adjust menu)
Wipe edge fill matte
(single-color only)
(single-color only)
Modifiers
Same as standard mode
Wipe border colors are
single-color only
single-color only
Transitions
Key priority
Cannot be used
Transition
preview
preview
Cannot be used
Preset color
mix
mix
Color matte or video signal
selected on the utility 2 bus
selected on the utility 2 bus
Color matte only
Snapshots
Cross-point
hold
hold
Utility 2 cannot be set
Utility 3 is added. BKGD
A/B and Key1 cannot be
set.
A/B and Key1 cannot be
set.
Control from an editor
Same as standard mode
Cannot be used