Sony 8000SF User Manual

Page of 591
374
Simple Transition
   Chapt
• The necessary settings have been made in a Setup menu to enable the split 
fader (See “Settings Relating to Video Switching (Transition Menu)” in 
Chapter 16 (Volume 2).)
• A background is selected for the next transition.
• For the transition type, [MIX] or [NAM] is selected.
Split fader operation
The two halves of the split fader lever correspond to the buses as follows.
Right fader lever: Background A bus
Left fader lever: Background B bus
The relationship between the positions of the two fader levers and the image 
output in a mix is as follows.
• When the transition type is NAM, the outputs of the A bus and B bus in the 
above table are the outputs subjected to NAM.
• The transition indicators always show the progress of the background A bus.
• The operation of the left lever and that of the right lever can be swapped. (See 
“Operation Settings (Operation Menu)” in Chapter 16 (Volume 2).)
Independent Key Transitions With a Simple Transition 
Module
You carry out independent key transition operations using the independent key 
transition control block (simple type). This controls only keys 3 and 4. 
However, each key button can be assigned to any key in setup (see Chapter 16 
“Overall Control Panel Settings (Config Menu)” (Volume 2))
.
Left lever position
Right lever 
position
A bus output
B bus output
Top
Top
100%
0%
Bottom
Top
100%
100%
Top
Bottom
0%
0%
Bottom
Bottom
0%
100%
Center
Center
50%
50%