Sony 8000SF User Manual
397
Key Setting Operations Using Menus
C
5
To adjust the color, press [Zabton Color] and adjust the following
parameters.
parameters.
Masks
There are two masks, which can be used to mask off unneeded parts of a key
or background, or to remove defects, and these are known as the main mask and
subsidiary mask. You can either use the main mask and subsidiary mask
independently, or at the same time.
or background, or to remove defects, and these are known as the main mask and
subsidiary mask. You can either use the main mask and subsidiary mask
independently, or at the same time.
For an overview of the masks, see page 55.
Using the main mask
For example, to use the main mask for key 1 on the M/E-1 bank, use the
following procedure.
following procedure.
1
In the M/E-1 >Key1 menu, select HF3 ‘Main Mask.’
The Main Mask menu appears.
2
In the <Mask Type> group, select the mask type.
Key Mask: Masks a part of a key.
Bkgd Mask: Masks a part of a background.
Bkgd Mask: Masks a part of a background.
3
In the <Mask Source> group, select the mask source.
Box: signal from the dedicated box generator
Pattern: signal from the dedicated pattern generator
Pattern: signal from the dedicated pattern generator
4
Set the mask source parameters.
• When a box is selected
Knob
Parameter
Adjustment
Setting values
1
Luminance
Luminance
0.00 to 100.00
2
Saturation
Saturation
0.00 to 100.00
3
Hue
Hue
359.99 to 0.00
4
Density
Density
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
Top
Top position
–100.00 to +100.00