Sony 8000SF User Manual

434

Key Snapshots

  

 Chap

The system switches to key snapshot mode, and the key source name 
display/key snapshot buttons show the status of registers 1 to 4 for key 1.
Off: Nothing is saved in the register.
Lit orange: Settings are saved in the register.
For a register holding a snapshot, the register name is shown as up to eight 
characters.

Hold down the [K-SS STORE] button, and press the key source name 
display/key snapshot button corresponding to the register in which you 
want to save the snapshot.

The key source name display/key snapshot button which you pressed lights 
yellow.

If you save a key snapshot in a register for which the button is lit orange or 
yellow, the existing contents of the register are overwritten.

For example, the following procedure recalls the state of the M/E-1 key 1 
settings.

In the M/E-1 independent key transition control block, press the key 
delegation button [KEY1], turning it on.

Press the [K-SS] button, turning it on.

Set the following buttons on or off, depending on the information you want 
to recall.
(These buttons are not provided in the downstream key control block.)

[K-MOD ENBL] button: When this is on, the key settings and key 

modifiers are recalled. When this is off, they are not recalled.

[K-TR ENBL] button: When this is on, the independent key transition 

settings are recalled. When this is off, they are not recalled.

If both buttons are off, the key memory function is enabled and only the 
saved selection of key fill and key source signals is recalled.

Press the key source name display/key snapshot button corresponding to 
the register you want to recall.

The button you pressed lights yellow, and this recalls the key snapshot.

To cancel a recall carried out in the downstream key control block, press 
the [UNDO] button in the downstream key control block.