Sony 8000SF User Manual
452
Basic Procedure for Wipe Settings
C
a) See page 65.
Making a wipe pattern like a Venetian blind (Pairing)
1
In the M/E-1 >Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
In the <Pairing> group, select the slit direction.
H: Create slits in the horizontal direction.
V: Create slits in the vertical direction.
V: Create slits in the vertical direction.
3
Set the following parameters.
a) See page 68.
Applying modulation to the wipe pattern (Modulation)
You can apply modulation independently to the main pattern and sub pattern.
Note
When using 1080PsF mode in an HD system, the modulation function is not
available.
available.
1
In the M/E-1 >Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
Depending on the desired effect, in the <Modulation> group select one of
the following.
the following.
H: Modulate the pattern, applying waviness in the horizontal direction to
edges.
V: Modulate the pattern, applying waviness in the vertical direction to
edges.
Fringe: Modulate the pattern, applying waviness in the radial direction to
edges.
2
Position V
Vertical position of pattern
–200.00 to +200.00
a)
Knob
Parameter
Adjustment
Setting values
Knob
Parameter
Adjustment
Setting values
1
Width
Width of the slits
1 to 128 (integer)
2
H Offset
Spacing in the horizontal direction –100.00 to +100.00
a)
3
V Offset
Spacing in the vertical direction
–100.00 to +100.00
a)