Sony 8000SF User Manual
457
Wipe Settings for Independent Key Transitions
Chapt
To set the wipe position using the trackball or joystick
You can also set the wipe position using the trackball or joystick in the device
control block.
You can also set the wipe position using the trackball or joystick in the device
control block.
1
In the device control block, press the [M/E1], [M/E2], [M/E3], or [P/P]
button, turning it on.
button, turning it on.
The buttons in the device control block are assigned to the wipe position
setting as follows.
setting as follows.
Table 1: Buttons and assigned settings
Table 2: Buttons assigned to functions
2
Press one of the buttons in Table 1 above, to select the wipe position to
which the operation applies. Multiple selection is possible.
which the operation applies. Multiple selection is possible.
3
Press the [POS] button, turning Position on.
4
Move the trackball or joystick, to set the wipe position. By pressing the [X]
button, turning it on, you can restrict movement to the horizontal direction,
and by pressing the [Y] button, turning it on, you can restrict movement to
the vertical direction.
button, turning it on, you can restrict movement to the horizontal direction,
and by pressing the [Y] button, turning it on, you can restrict movement to
the vertical direction.
To set the wipe position by a menu operation
1
Press [Position] in the Key1 Wipe Adjust menu, turning it on.
2
Set the following parameters.
Button name
Setting
K1 CB1
Wipe position for independent key 1 transition
K2 CB2
Wipe position for independent key 2 transition
K3 FM1
Wipe position for independent key 3 transition
K4 FM2
Wipe position for independent key 4 transition
Button name
Function
POS
Toggle Position on or off.
X, Y
Fix the operating direction.
CTR
Return the pattern position to the center of the screen.
Knob
Parameter
Adjustment
Setting values
1
Position H
Horizontal position
–200.00 to +200.00
a)
2
Position V
Vertical position
–200.00 to +200.00
a)