Sony 8000SF User Manual

503

Still Image Operations

  Cha

In the frame memory selection area, select the FM to be assigned. (See 
page 495.)

To select V/K mode, press [V/K Mode], turning it on.

Press a button in the frame memory folder selection area, to select the 
folder to hold the freeze image.

The folder selected here is the destination folder for writing the freeze 
image.
It is not possible to change the selection of this folder after the following 
step 5.

An orange bar appears on the selection button for the destination folder.

Press [Edit Enable], turning it on.

The signals of frame memory source buses 1 and 2 are assigned to the pair 
of FMs selected in step 2, and the combining of the background signal (the 
signal providing the background for combination) and the input signal (the 
signal providing the foreground for combination) is now possible.

The input signal is lowered by one line, but when you apply a freeze, the 
freeze image is returned to the correct position.

To use a color matte signal for the input signal, press [Frgd Color], turning 
it on.
Even when pair mode is enabled, you can make separate settings for each 
FM.

Turn the knobs to adjust the following parameters.

If you turned [Frgd Color] off in step 6, if required press [Input Adjust] to 
display the Input Adjust menu, and make the video process (see page 498) 
and mask (see page 499) settings for the input signal.

1

Luminance

Luminance

0.00 to 100.00

2

Saturation

Saturation

0.00 to 100.00

3

Hue

Hue

359.99 to 0.00