Sony 8000SF User Manual

514

Frame Memory Clip Operations

  

 Chapt

Press the thumbnail of the clip you want to recall.

Press [Recall].

This recalls the clip file, which is assigned to the FM you selected in step 2.
In pair mode, if a clip is selected, the main file is output to FM1, and the 
sub file to FM2. In single mode, when only one of FM1 and FM2 is 
selected, the front file on the thumbnail is output.

To recall in direct recall mode
Direct recall means that pressing a thumbnail immediately recalls the file.
In this mode, only the front thumbnail file is recalled.

In step 7 above, instead of pressing [Recall], press [Direct Recall].

Press the thumbnail for the file you want to recall.

This immediately recalls the file.

To display the subsidiary file in front
With the direct recall mode on, press [Sub Display], turning it on.

You can play a recalled clip by a menu operation or by using the device control 
block.

With a pair file recalled, it is possible to set [Pair] to Off and carry out a single 
file operation, but if you then set [Pair] to On again, the output of frame 
memory may be black. In such cases it is necessary to recall the pair file once 
more.

In the Frame Memory menu, select VF2 ‘Clip’ and HF2 ‘Play.’

The Play menu appears. The status of the clip shown in the current target 
FM selection buttons appears here.