Sony 8000SF User Manual
524
Clip Transition Operations
Chapt
Clip Transition Operations
For an overview of clip transitions, see “Frame Memory Clip Function” (page
92).
92).
Notes
• The clip transition function is only supported by the MVS-8000A/8000G.
• When a clip transition is selected as the transition type, if one of the wipe
• When a clip transition is selected as the transition type, if one of the wipe
direction selection buttons in the transition control block is lit, it indicates the
direction of clip playback.
direction of clip playback.
Setting a clip transition
The following example describes the case of a clip transition using FM 1&2
Clip on the M/E-1 bank.
Clip on the M/E-1 bank.
Note
To use a clip transition effectively, the image from the frame memory clip
being played back during the clip transition should be seen in the M/E-1
program output. For example, inserting a key using frame memory output 1 and
frame memory output 2.
being played back during the clip transition should be seen in the M/E-1
program output. For example, inserting a key using frame memory output 1 and
frame memory output 2.
1
Display the M/E-1 >Misc >Transition menu, and in the <Transition Type>
group select “FM1&2 Clip.”
group select “FM1&2 Clip.”
2
Press [Clip Transition].
The Clip Transition menu appears.