Sony 8000SF User Manual

57

Keys

  Chapt

Full mode: All settings except transition (the same parameters as simple mode, 

Fine Key, key modifiers, main and sub mask settings, chroma key detailed 
settings, and so on)

Key settings other than the key on/off status and the key priority can all be 
instantaneously saved in a dedicated register, for recall when required. A key 
snapshot comprises three values: a cross-point button number, key memory full 
mode, and independent key transition, and can be called in any combination.
There are four key snapshot registers for each keyer.

The blink function provides the following effects.
Key blink: The key is inserted and deleted at the specified frequency.

You can also set the frequency and the proportion of the cycle for which 
the key is inserted.

Edge blink: Key fill and key edge fill are interchanged at the specified 

frequency. You can specify both the frequency and the proportion of the 
cycle for which the interchange occurs.

The blink settings are in the Transition menu for each key. (See “Blink 
Function” (page 404).)

With a simple operation you can return the key adjustment values to their 
defaults.
The adjustment values which can be returned to their default values are as 
follows.
• Adjustment values for the particular key type (Clip, Gain, Density, Filter, 

etc.)
In the case of chroma keying, all adjustment values return to their default 
values.

• Key position
• Key inversion