Lindy 32827 User Manual

Page of 9
 
© LINDY ELECTRONICS LIMITED       &       LINDY-ELEKTRONIK GMBH       -       SECOND EDITION (MAY 2009) 
 
 
For Home and Office Use 
Tested to Comply with  
FCC Standards 
 
KVM Switch Compact USB Audio 
 
User Manual                                                              English 
Benutzerhandbuch                                                  Deutsch 
Manuel Utilisateur                                                   Français 
Manuale d’uso                                                           Italiano 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
LINDY No. 32797 – 2 Port  
LINDY No. 32827 – 4 Port  
 
 
www.LINDY.com
User Manual                                                             English 
- 2 - 
 
Introduction 
Thank you for purchasing the LINDY KVM Switch Compact Audio. Please 
read this short manual carefully to fully understand all the functions and 
advanced features of this KVM Switch.  
This manual refers to the 2 Port Model 32797 with KVM cables fixed to the 
KVM switch and to the 4 port model 32827 with individually connected KVM 
combo cables. These cables can be extended up to a maximum length of 5m 
using individual standard extension cables. 
Both KVM Switches allows several computers to be connected and controlled 
from a single keyboard, monitor and mouse thereby reducing hardware costs 
and maximising desk space. Both are compatible with PC as well as with Mac 
computers. Computer port selection may be made by any of the following: Top 
panel push buttons on the switch, Keyboard Hotkey – configurable by the user 
from Windows and Mac systems, Mac Dock icon or Windows software or the 
task bar icon.  
In addition to USB keyboard and mouse support both KVM Switches allow 
you to share USB devices. Please refer to the additional information below. 
Package contents  
 
LINDY KVM Switch Compact USB Audio ( 2 or 4 port) 
 
CD containing the Windows and Mac software 
 
This manual 
 
Model 32827 (4 Port): 4 sets of KVM cables to connect the computers: 
USB/VGA combo KVM cable and 2x3.5mm Speaker and microphone 
cables 
Installation 
Sharing of further additional USB devices: 
If you connect a USB 1.1/2.0 hub to the USB port of the KVM Switch you can 
switch and share additional USB 1.1/2.0 devices between your computers. 
Depending on the power requirements of the USB devices you want to share 
you should use a USB hub with an external power supply if the connected 
devices require more than 500mA in total.  
Note: The KVM Switches operate with USB 1.1 speed and support USB 2.0 
Full Speed data transfer rates up to 12MBit/sec. The hub (USB 1.1 or 2.0) can 
be connected to either the mouse or keyboard port. If you want to share USB 
2.0 peripherals with High Speed up to 480MBit/sec. please refer to the LINDY 
KVM Switch Pro USB 2.0 series.