3com NJ240FX User Guide
Mounting the IntelliJack
7
8 Reassemble the plastic cable tray to the main housing in the reverse order from
step 2.
9 If the pass-thru feature is required, route the existing female RJ45 connector and
cable through the same rectangular opening in the metal mounting plate. Again
ensure you have allowed yourself enough room to terminate the connection.
ensure you have allowed yourself enough room to terminate the connection.
10 If the pass-thru cable feature is required, connect the male RJ45 connector to the
existing female RJ45 connector.
11 Position the mounting plate over the NEMA box with the UP arrow indicator
facing upward for typical installations and secure into place using the two
supplied shorter pan head machine screws.
supplied shorter pan head machine screws.
12 Push back all excess cabling into the NEMA box.
NOTE: Care should be taken when reassembling the plastic cable tray to the
main housing so as not to damage the four installation guide hooks.
main housing so as not to damage the four installation guide hooks.