3com 4210 User Manual

C

HAPTER

 28: P

O

E/P

O

E P

ROFILE

 C

ONFIGURATION

 G

UIDE

#

interface Ethernet1/0/7

apply poe-profile Profile2

#

interface Ethernet1/0/8

apply poe-profile Profile2

#

interface Ethernet1/0/9

apply poe-profile Profile2

#

interface Ethernet1/0/10

apply poe-profile Profile2 

1 When the apply poe-profile command is used to apply a PoE profile to a port, 

some PoE features can be applied successfully while some cannot. PoE profiles are 
applied to Switch 5500/5500G according to the following rules:

■

When the apply poe-profile command is used to apply a PoE profile to a port, 
the PoE profile is applied successfully as long as one PoE feature in the PoE 
profile is applied properly. When the display current-configuration command is 
used for query, it is displayed that the PoE profile is applied properly to the port.

■

If one or more features in the PoE profile are not applied properly on a port, the 
switch will prompt explicitly which PoE features in the PoE profile are not 
applied properly on which ports.

■

The display current-configuration command can be used to query which PoE 
profile is applied to a port. However, the command cannot be used to query 
which PoE features in a PoE profile are applied successfully.

2 If you cannot apply a PoE profile to a PoE port, it may be due to the following 

reasons:

■

Some of the PoE features in the PoE profile have been configured through 
other modes;

■

Some of the PoE features in the PoE profile are not compliant with the 
configuration requirements for PoE ports;

■

Another PoE profile has been applied to this PoE port.

You can solve the problem in the following ways:

■

In the first case, you can solve the problem by removing the original 
configurations.

■

In the second case, you need to modify some configurations in the PoE profile.

In the third case, you need to remove the application of the undesired PoE profile 
from the PoE port.