3com 4210 User Manual
NTP Multicast Mode Configuration
275
Precautions
The local clock of the Switch 5500, 5500G, or 4210 cannot be set as a reference
clock. It can synchronize other devices as a reference clock only when its clock is
synchronized.
clock. It can synchronize other devices as a reference clock only when its clock is
synchronized.
NTP Multicast Mode
Configuration
Configuration
Network Diagram
Figure 85 Network diagram for NTP multicast mode configuration
Networking and
Configuration
Requirements
■
The local clock of Device C is to be used as a reference source, with the stratum
level of 2. Set Device C to work in the multicast server mode and send
multicast through its VLAN-interface 2.
level of 2. Set Device C to work in the multicast server mode and send
multicast through its VLAN-interface 2.
■
Device A and Device D are Switch 5500s. Set Device A and Device D to work in
the multicast client mode and listen to multicasts through their VLAN-interface
2 respectively.
the multicast client mode and listen to multicasts through their VLAN-interface
2 respectively.
Applicable Products
Configuration Procedure
■
Configure Device C.
# Set Device C to work as the multicast server and send multicasts through its
VLAN-interface 2.
VLAN-interface 2.
<DeviceC> system-view
[DeviceC] interface Vlan-interface 2
[DeviceC-Vlan-interface2] ntp-service multicast-server
■
Configure Device A (perform the same configuration on Device D).
# Set Device A to work as the multicast client and listen multicasts through its
VLAN-interface 2.
VLAN-interface 2.
Vlan-int2
3.0 .1.11/24
3.0 .1.11/24
Vlan- int2
3.0.1 .12 /24
Vlan -int2
3.0.1.13 /24
Vlan -int2
3.0.1.14/24
Vlan -int2
3.0.1.12 /24
3.0.1.12 /24
Device A
Device B
Device C
Device D
Product series
Software version Hardware version
Switch 5500
Release V03.02.04
All versions
Switch 5500G
Release V03.02.04
All versions
Switch 4500
Release V03.03.00
All versions
Switch 4210
Release V03.01.00
All versions