3com 4500 PWR 26-PORT User Manual
ARP Configuration Commands
101
ip host
Syntax
ip host hostname ip_address
undo ip host hostname [ ip_address ]
View
System view
Parameters
hostname
Enter the host name of the connecting device. This is a character string
of up to 20 characters.
ip_address
Enter the host’s IP address.
Description
Use the
ip host
command to configure the host name and the host IP address in
the Switch 4500’s host table. This allows you to ping or Telnet a local device by
host name.
host name.
Use the
undo ip host
command to remove the host name and the host IP
address from the host table.
By default, the host name and corresponding IP address are null.
Related command:
display ip host
Example
To enter a host name of Lanswitch1 for the IP address 202.38.0.8, enter the
following.
following.
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]ip host Lanswitch1 202.38.0.8
ARP Configuration
Commands
Commands
This section describes the commands you can use to configure and manage the
Address Resolution Protocol (ARP) operations on your Switch 4500.
Address Resolution Protocol (ARP) operations on your Switch 4500.
arp check enable
Syntax
arp check enable
undo arp check enable
View
System View
Parameter
none
Description
Use the
arp check enable
command to enable the checking of an ARP entry so
the device does not learn the ARP entry where the MAC address is a multicast