3com 4500 PWR 26-PORT User Manual

[4500]rip

[4500-rip]reset

System view

None

Use the 

 command to enable RIP and enter the RIP command view. From here, 

you can configure RIP using the other commands described in this section.

Use the 

 command to disable RIP. By default, RIP is disabled.

Enabling RIP does not affect interface configurations.

To enable RIP, and enter RIP view, enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]rip

[4500-rip]

rip authentication-mode { simple password | md5 { usual key-string | 

nonstandard key-string key-id }}

Interface View

 Enter to specify simple text authentication mode.

Enter the simple text authentication key.

Enter to specify MD5 cipher text authentication mode.

 Enter to specify the MD5 cipher text authentication packet to use the 

general packet format (RFC1723 standard format).

Enter the MD5 cipher text authentication key. If it is entered in plain 

text, the MD5 key is a character string not exceeding 16 characters. This key is 
displayed in a cipher text form in a length of 24 characters when