3com 4500 PWR 26-PORT User Manual

Page of 466
Stack Commands
209
2   00e0-fc03-5502 10   UP/DOWN     2     2/3   3   A
3   00e0-fc04-5502 10   UP/DOWN     2     4/5   3   A
6   00e0-fc05-5502 10   UP/DOWN     2     10/11 3   A
5   00e0-fc06-5502 10   UP/DOWN     2     8/9   3   A
4   00e0-fc07-5502 5    UP/DOWN     2     6/7   3   M
7   00e0-fc04-6502 10   UP/DOWN     2     12/13 3   A
8   00e0-fc01-5502 10   UP/DOWN     2     14/15 5   A
display ftm
Syntax
display ftm { information | route | topology-database }
View
Any view
Parameter
information:
 Displays the FTM protocol information.
route:
 Displays the MAC forwarding table of the fabric.
topology-database:
 Displays the topology database information of the fabric.
Description
Use the 
display ftm information
 command to view the FTM protocol 
information, including DDP status, unit ID, fabric link status, stacking port status 
and DDp packet statistics.
Use the 
display ftm route
 command to view the MAC forwarding table of the 
fabric, which is stored in the CPU.
Use the 
display ftm topology-database
 command to view the topology 
database information of the fabric.
Example
To display the FTM protocol information of the Switch, enter the following:
[4500]display ftm information
DDP Protocol  : disabled
stacking VLAN : NONE
stacking Auth  : NONE
display xrn-fabric
Syntax
display xrn-fabric [ port ]
View
Any view
Parameter
port:
 display the stacking port information.
Description
Use the 
display xrn-fabric 
command to view the information of the entire 
stack, including unit ID, unit name, operation mode. If the stack information is