3com 4500 PWR 26-PORT User Manual
RSTP Configuration Commands
217
Times: Hello Time 2 sec, Max Age 20 sec
Forward Delay 15 sec, Message Age 0
BPDU sent: 0
TCN: 0, RST: 0, Config BPDU: 0
BPDU received: 0
TCN: 0, RST: 0, Config BPDU: 0
reset stp
Syntax
reset stp [ interface interface_list ]
View
User view
Table 27 Display information
Field
Description
Protocol mode
Current Switch is executing RSTP.
The bridge ID (Pri.MAC):
32768.00e0-fc00-3900
32768.00e0-fc00-3900
The bridge times: Hello Time 2 sec, Max
Age 20 sec, Forward Delay 15 sec
Age 20 sec, Forward Delay 15 sec
Root bridge ID(Pri.MAC):
32768.00e0-fc00-3900
32768.00e0-fc00-3900
Root path cost: 0
Bridge bpdu-protection: disabled
Default path cost standard is dot1t
Timeout factor: 3
The RSTP configuration of the Switch, including
priority and MAC address of local bridge, Configured
time parameter (Hello Time, Max Age, Forward
Delay), priority and MAC address of root bridge, the
path cost from this Switch to the root path cost
mode, timeout time.
priority and MAC address of local bridge, Configured
time parameter (Hello Time, Max Age, Forward
Delay), priority and MAC address of root bridge, the
path cost from this Switch to the root path cost
mode, timeout time.
Port 2 (Ethernet1/0/2) of bridge is
DOWN
DOWN
Port spanning tree protocol: enabled
Port role: Disabled Port
Port path cost: 200000 Port priority:
128
128
Designated bridge ID(Pri.MAC):
32768.00e0-fc00-3900
32768.00e0-fc00-3900
The Port is a non-edged port
Connected to a non-point-to-point LAN
segment
segment
Maximum transmission limit is 3
Packets / hello time
Times: Hello Time 2 sec, Max Age 20
sec
sec
Forward Delay 15 sec, Message Age 0
BPDU sent: 0
TCN: 0, RST: 0, Config BPDU: 0
BPDU received: 0
TCN: 0, RST: 0, Config BPDU: 0
The RSTP configuration of port 2, including the
port’s status is down, the port RSTP is enabled, this
port is Disabled Port, the cost to root of this port ,
the priority of this port, the priority and MAC address
of Designated bridge, this port is configured as a
non-edge port, the link of this port is
non-point-to-point, Maximum transmission limit is 3
BPDUs per hello time, configured RSTP time
parameters(Hello Time, Max Age, Forward Delay,
Message Age), the statistics of BPDU (TCN specifies
the number of topology-change-notify datagram,
RST specifies the number of RSTP datagram, Config
BPDU specifies the number of STP datagram)
port’s status is down, the port RSTP is enabled, this
port is Disabled Port, the cost to root of this port ,
the priority of this port, the priority and MAC address
of Designated bridge, this port is configured as a
non-edge port, the link of this port is
non-point-to-point, Maximum transmission limit is 3
BPDUs per hello time, configured RSTP time
parameters(Hello Time, Max Age, Forward Delay,
Message Age), the statistics of BPDU (TCN specifies
the number of topology-change-notify datagram,
RST specifies the number of RSTP datagram, Config
BPDU specifies the number of STP datagram)