3com 4500 PWR 26-PORT User Manual

C

HAPTER

 11: U

SING

 AAA 

AND

 RADIUS C

OMMANDS

System View

 Specifies the Radius server name with a character string 

not exceeding 32 characters. 

Use the 

 command to configure a RADIUS scheme group and enter 

its view. Use the 

 command to delete the specified RADIUS 

scheme. 

A default RADIUS scheme named system has been created in the system. The 
attributes of system are all default values. 

RADIUS protocol configuration is performed on a per-RADIUS-scheme basis. Every 
RADIUS scheme shall at least have the specified IP address and UDP port number 
of the RADIUS authentication/authorization/accounting server and some necessary 
parameters exchanged with the RADIUS client end (Switch). It is necessary to 
create the RADIUS scheme and enter its view before performing other RADIUS 
protocol configurations. 

A RADIUS scheme can be used by several ISP domains at the same time. You can 
configure up to 16 RADIUS schemes, including the default RADIUS scheme named 
as System.

Although 

 can remove a specified RADIUS scheme, the 

default one cannot be removed. Note that a scheme currently in use by the online 
user cannot be removed. 

Related commands: 

, 

, 

, 

, 

, 

, 

, 

,

, 

, 

, 

.

To create a RADIUS scheme named “3Com” and enter its view, enter the 
following: 

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]radius scheme 3Com

New Radius scheme

[4500-radius-3Com]