3com 4500 PWR 26-PORT User Manual
394
C
HAPTER
12: U
SING
S
YSTEM
M
ANAGEMENT
C
OMMANDS
RMON Configuration
Commands
Commands
This section describes the Remote Monitoring (RMON) configuration commands
available on your Switch 4500.
available on your Switch 4500.
display rmon alarm
Syntax
display rmon alarm [ alarm-table-entry ]
View
All views
Parameter
alarm-table-entry:
Alarm table entry index.
Description
Use the
display rmon alarm
command to view RMON alarm information.
For the related commands, see
rmon alarm.
Example
Display the RMON alarm information.
<SW4500>display rmon alarm
Alarm table 1 owned by 3COM is VALID.
Samples absolute value : 1.3.6.1.2.1.16.1.1.1.4.1
<etherStatsOctets.1>
Sampling interval : 10(sec)
Rising threshold : 1000(linked with event 1)
Falling threshold : 100(linked with event 1)
When startup enables : risingOrFallingAlarm
Latest value : 0
display rmon event
Syntax
display rmon event [ event-table-entry ]
Table 40 Output description of the display rmon alarm command
Field
Description
Alarm table 1
Index 1 in the alarm table
3Com
Owner
VALID
The entry corresponding to the index is valid
Samples absolute value
Sampling the absolute value of the node
1.3.6.1.2.1.16.1.1.1.4.1
1.3.6.1.2.1.16.1.1.1.4.1
Sampling interval
The interval of sampling the value
Rising threshold1
Rising threshold. When sampling value rises from
normal value to this threshold, rising threshold alarm
will be triggered.
normal value to this threshold, rising threshold alarm
will be triggered.
Falling threshold
Falling threshold. When sampling value decreases from
normal value to this threshold, falling threshold alarm
will be triggered.
normal value to this threshold, falling threshold alarm
will be triggered.
startup
The first trigger
risingOrFallingAlarm
The type of the first alarm: Specifies to alarm when
exceeding the rising threshold or the falling threshold
exceeding the rising threshold or the falling threshold