Raritan Engineering KX2-832 User Manual

 

Chapter 7: Device Management 

 

e.  The Username Field and Password Field, which are both 

optional, contain the labels that are expected to be associated 
with the username and password entries. It is in these fields you 
should enter the field names for the username and password 
fields used on the login screen for the web application. You can 
view the HTML source of the login screen to find the field names, 
not the field labels. See 

 (on page 157) for tips on adding a web browser 

interface. 

6.  If applicable, define the USB profile for the blade chassis or select an 

existing USB profile. Click the USB Profiles Select USB Profiles for 

Port icon 

  or the Apply Select Profiles 

to Other Ports icon 

 to 

expand these sections of the page. See 

 (on page 167). 

7.  Click OK to save the configuration. 

 

1.  If you selected IBM BladeCenter (Other), auto-discovery is not 

available. Configure the blade chassis as applicable.   

a.  Switch Hot Key Sequence - Select the hot key sequence that will 

be used to switch from KVM to the blade server.   

b.  Administrative Module Primary IP Address/Host Name - Enter 

the primary IP address for the blade chassis. Not applicable. 

c.  Maximum Number of Slots - Enter the default maximum number 

of slots available on the blade chassis. 

d.  Port Number - The default port number for the blade chassis is 

22. Not applicable. 

e.  Username - Not applicable. 

f. 

Password - Not applicable. 

2.  Change the blade chassis name if needed.   

3.  Indicate the blades that are installed in the blade chassis by 

checking the Installed checkbox next to each slot that has a blade 
installed.  Alternatively, use the Select All checkbox.    If needed, 
change the blade server names. If it is not already named, the 
Dominion KX II assigns a name to the blade server. The default 
blade server naming convention is # Blade_Chassis_Port#_Slot#.