Panasonic UB-5325 User Manual

■ Installing Drivers / Board Image 

The USB, printer, TWAIN driver and Board Image 
Capture are installed in your computer by following 
procedures.

• Do not yet connect a USB cable to the 

electronic board.

Power on your computer and start Windows*

1

.

• Log on as an administrator for Windows 

2000, Windows XP or Windows Vista.

*

1

Microsoft

® Windows® operating system 

(hereafter Windows)

Insert the CD-ROM into the CD-ROM drive. 
The Setup window appears automatically.

• Depending on the operating system or the 

settings that you are using, the Setup 
window may not appear automatically.
In such a case, execute “Menu.exe” in the 
CD-ROM from the Explorer.

• If the Autoplay dialog box appears in 

Windows Vista, click “Run Menu.exe”.

When “Welcome” window appears, click 
[Next].

Click [

Install Panaboard Software].

• If “User Account Control” window is 

displayed in Windows Vista, select 
[Continue] to continue the installation.

• To read the operating instructions in the 

provided CD-ROM, the Adobe Reader or 
Acrobat

® Reader must be installed in your 

computer. It can be downloaded from the 
Adobe's Web site if Internet is available.

Read “End-User License Agreement” carefully 
and click [Yes].

When the following window appears, check 
that the electronic board is not connected to 
your computer and click [OK].

• If “Windows can't verify the publisher of this 

driver software” is displayed in Windows 
Vista, select “Install this driver software 
anyway” to continue the installation.

• For Windows 98 or Windows Me, a floppy 

disk or CD-ROM for installing the operating 
system may be required

.

• If the screen prompts to restart Windows, 

restart Windows.

When the following window appears after files 
are copied, power the electronic board on, and 
connect a USB cable from the electronic 
board to your computer.