Panasonic UB-5325 User Manual

English

■ Control panel

This lamp indicator notifies the user when the time to replace the 
thermal transfer film is approaching (estimated) and of the 
printing contrast used during copying.
Indicator off: 

Normal printing contrast

Indicator on: 

Darker than normal printing contrast

Indicator flashing*: Almost time to replace the thermal transfer 

film

Replacement film (UG-6001) is separately available 
from the dealer where you purchased your unit.

Each time this key is pressed, the unit will alternate between 
normal and dark contrast modes (Normal/Dark).

This key causes the front and back of the screen to be copied on 
a single sheet of paper.

This indicator displays the number of copies to be made. The 
display changes each time the Multi-Copy/Stop Key is pressed.

Example: 1 

→  2 →  ··· →  9 →  1 →  ···

When an error occurred, a flashing symbol will appear in this display to 
indicate the error status. (See page 27.)

When making multiple copies, press this key until the desired 
number of copies is displayed on the Multi-Copy/Error Indicator. 
This key can also be pressed to stop copying while executing 
multiple copies. 

• The display changes as shown below each time the screen is copied. After 

reaching 0, the display will reset to 1.

Example: 5 

→  4 →  3 →  2 →  1 →  0 →  1 

(Number is counted down.)

This key causes the screen to be copied.

Pressing this key advances the screen from right to left.