DELL PC7024 User Manual

IPv6 Routing Commands

The following example displays the long form of the command, and indicates 

whether address autoconfiguration or DHCP client are enabled on the 

interface. When the interface acts as a host interface, the output also shows 

the default gateway on the interface, if one exists.

console#show ipv6 interface vlan2

IPv6 is enabled

IPv6 Prefix is ................................ 

FE80::211:88FF:FE2A:3E3C/128

                                                

2017::A42A:26DB:1049:43DD/128 

[DHCP]

Routing Mode................................... Enabled

Administrative Mode............................ Enabled

IPv6 Routing Operational Mode.................. Enabled

Bandwidth...................................... 100000  kbps

Interface Maximum Transmit Unit................ 1500

Router Duplicate Address Detection Transmits... 1

Address Autoconfigure Mode..................... Disabled

Address DHCP Mode.............................. Enabled

Router Advertisement NS Interval............... 0

Router Advertisement Lifetime.................. 1800

Router Advertisement Reachable Time............ 0

Router Advertisement Interval.................. 600

Router Advertisement Managed Config Flag....... Disabled

Router Advertisement Other Config Flag......... Disabled

Router Advertisement Router Preference......... medium

Router Advertisement Suppress Flag............. Disabled

IPv6 Destination Unreachables.................. Enabled

IPv6 Default Router............................ 

fe80::213:c4ff:fedb:6c42

Use the show ipv6 interface management statistics command in Privileged 

EXEC mode to show the DCHPv6 client statistics.

2CSPC4.XCT-SWUM2XX1.book  Page 1038  Monday, October 3, 2011  11:05 AM