Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. PC7024
  5. User Manual

DELL PC7024 User Manual

Download
Page of 1730
Multicast Commands
1079
Syntax
ip pim rp-address {
rp-address group-address group-mask [ override ]}
no ip pim rp-address {
rp-address group-address group-mask}
Parameter Description
Default Configuration
None —no static multicast groups are configured for an RP.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip pim rp-address 192.168.21.1 
239.1.0.0 255.255.0.0 override
ip pim rp-candidate
Use the ip pim rp-candidate command in Global Configuration mode to 
configure the router to advertise itself to the bootstrap router (BSR) router as 
a PIM candidate rendezvous point (RP) for a specific multicast group range. 
Use the no form of this command to return to the default configuration. This 
command replaces the ip pimsm rp-candidate command.
Parameter
Description
rp-address 
The valid IPv4 address for the rendezvous point.
group-address
A valid multicast group address to be sourced from the 
rendezvous point.
group-mask
A mask indicating the range of multicast groups sourced from 
the RP 
override
A flag indicating that the static entry should override 
dynamically learned entries for the configured multicast group.
2CSPC4.XCT-SWUM2XX1.book  Page 1079  Monday, October 3, 2011  11:05 AM