DELL PC7024 User Manual

OSPF Commands

User EXEC, Privileged EXEC modes

This command has no user guidelines.

The following example displays the information for the IFO object or virtual 

interface tables associated with VLAN 3.

console#show ip ospf interface vlan 10

IP Address..................................... 1.1.1.1

Subnet Mask................................. 255.255.255.0

Secondary IP Address(es).......................

OSPF Admin Mode................................ Enable

OSPF Area ID................................... 0.0.0.0

OSPF Network Type.............................. Broadcast

Router Priority................................ 1

Retransmit Interval............................ 5

Hello Interval................................. 10

Dead Interval.................................. 40

LSA Ack Interval............................... 1

Iftransit Delay Interval....................... 1

Authentication Type............................ None

Metric Cost.................................... 10  (computed)

Passive Status................................. Non-passive 

interface

OSPF Mtu-ignore................................ Disable

State.......................................... designated-router

Designated Router.............................. 1.1.1.1

Backup Designated Router....................... 0.0.0.0

Number of Link Events.......................... 2 

2CSPC4.XCT-SWUM2XX1.book  Page 1162  Monday, October 3, 2011  11:05 AM