Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. PC7024
  5. User Manual

DELL PC7024 User Manual

Download
Page of 1730
1248
Routing Information Protocol Commands
•
integer — RIP route preference. (Range: 1-255)
Default Configuration
15 is the default configuration.
Command Mode
Router RIP Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the route preference value of RIP in the router at 
100.
console(config-router)#distance rip 100
distribute-list out
Use the distribute-list out command in Router RIP Configuration mode to 
specify the access list to filter routes received from the source protocol. Use 
the no form of the command to remove the access list from the specified 
source protocol.
Syntax
distribute-list 
accesslistname out {ospf | static | connected}
no distribute-list 
accesslistname out {ospf | static | connected}
•
accesslistname — The name used to identify the existing ACL. The range 
is 1-31 characters.
• ospf — Apply the specific access list when OSPF is the source protocol.
•
static — Apply the specified access list when packets come through a static 
route.
•
connected — Apply the specified access list when packets come from a 
directly connected route.
2CSPC4.XCT-SWUM2XX1.book  Page 1248  Monday, October 3, 2011  11:05 AM