DELL PC7024 User Manual

Virtual Router Redundancy Protocol Commands

Descriptions containing spaces must be wrapped with quotes.

The following example creates virtual router group 5 on VLAN 15 and 

configures its description.

console(config)#interface vlan 15

console(config-if-vlan15)#vrrp 5

console(config-if-vlan15)#vrrp 5 description “Sales 

and Marketing”

Use the vrrp ip command in Interface Configuration mode to enable VRRP 

and set the virtual router IP address value for an interface. Use the no form of 

the command remove the secondary IP address. It is not possible to remove 

the primary IP address once assigned. Remove the VRRP group instead.

group ip ip-address [secondary]

group ip ip-address vlan secondary

VRRP is not configured on the interface.

group

The virtual router identifier. (Range: 1-255)

ip-address

The IP address of the virtual router.

secondary

Designates the virtual router IP address as a secondary IP 

address on an interface.

2CSPC4.XCT-SWUM2XX1.book  Page 1273  Monday, October 3, 2011  11:05 AM